Facing Problems with
the Wear Plates on your
Mill ?


Solutions !
Contact



The Degree of Wear is
determined by outside influences
and mechanical effects
 such as:

 
Abrasion

 - from scale and abrasive particles
- severly worn bearing surfaces from
- any relative movement between
- chock and housing
- localized overloads
 
Chamfer Wear

 - damaged Chamfers
- reduced Bearing Surfaces
- no precise Guidance for chock loading
- open passage for water and abrasive particles
 
Corrosion + Erosion

- Cooling Water
- High Pressure Descaling Water
- washed out Lubrication
- humid Atmosphere
- fretting corrosion
- pop-outs of material
 
Wear of Mounting Surfaces through

 - constant Impact loads
- hammering
- localized Overload
- corrosion + erosion
 
Shimming
- compensating wear
- tightening the mill
- cheap quick-fix
- always available
- hidden labor cost
- cost of destroying mounting surfaces







Josua CORTS Sohn
Bearing Technology
D-42855 Remscheid
Ronsdorfer Straße 29-37

Tel. +49 21 91 - 9 88 00-0
Fax +49 21 91 - 9 88 00-50

e-mail:info@corts.de